Home
Home > Product > Home & > Sntieecr 50 Sheets DTF Transfer Film for DTF Printers - A4 (8.3" x 11.7") Double-Sided Matte Finish DTF Film Transfer Paper Direct to Film for T-Shirts Bags Cotton and Polyester

Sntieecr 50 Sheets DTF Transfer Film for DTF Printers - A4 (8.3" x 11.7") Double-Sided Matte Finish DTF Film Transfer Paper Direct to Film for T-Shirts Bags Cotton and Polyester

Publish Time

2023-07-10 00:00:00

Quick Overview

【Premium DTF Film】Coming with 50 pieces of DTF transfer film with a size of 8.3 x 11.7 inches, suitable for printing on cotton, polyester cotton, canvas, and other fabric, is enough to meet your needs@【Double-sided Matte Material】Our DTF papers are double-sided matte to achieve smooth printing into paper. High-tolerant and stretching. The coating is uniform, and the cold and cold are easy to peel off@【Bright and Colorful Pattern】The patterns printed by using these DTF transfer papers are bright and clear, which are very strong, not fading, not easy to peel off, not easy to crack, and can be clear after washing or kneading@【Easy to Operate】Our transfer paper iron allows you to effortlessly apply your creativity to your projects, just use a DTF printer and a household iron. Please note transfer temperature should not exceed 150°C, recommended compression time: 10 seconds. A warm reminder that the printed side is indicated on the package@【Ideal and Practical Gift】This DTF film sheet can be applied to canvas, hoodies, sneakers, tote bags, T-shirts, hats, pillowcases, gloves, cell phone cases, etc., to design special patterns that are uniquely yours, and to make charming gifts for you and your family

Choose your country:

United States
Sntieecr 50 Sheets DTF Transfer Film for DTF Printers - A4 (8.3" x 11.7") Double-sided Matte Finish DTF Film Transfer Paper Direct to Film for T-shirts Bags Cotton and Polyester


How to Use DTF Transfer Film:

1. Print the pattern. Select a high-definition picture to print on the printing surface of the transfer film.

2. Spread the printing powder on the back of the printed pattern, shake off the excess powder, and make the powder adhere to the white ink

3. With the back facing up, put it in the oven to dry for 30 seconds at a temperature of 90-110 degrees

4. Adjust the hot stamping equipment, adjust the parameters, the temperature is 140 degrees, and the time is 10s

5. Or use an iron at a temperature of 150 degrees for 30 seconds. Note that the maximum temperature does not exceed 180 degrees to damage the transfer film

6. It can be peeled off by heat, peeled off after three seconds, or peeled off after the product cools down

The Printing Surface Has Been Marked

Other ways to distinguish：

The side with grainy touch is the printing surface

Use transparent tape to paste the white particle powder is the printing surface