Home > Product > Home & > Sntieecr 28 Pieces Table Tumbler Spinner Kit, Metal C-Clamp Cup Turners for Craft Tumblers with Tumbler Turner Foam and Practical Epoxy Tools

Sntieecr 28 Pieces Table Tumbler Spinner Kit, Metal C-Clamp Cup Turners for Craft Tumblers with Tumbler Turner Foam and Practical Epoxy Tools

Publish Time

2023-02-06 12:03:18

Quick Overview

Unique C-Clamp Turner: Tumbler Turner formed with wooden body and a metal clamp base. Using the sturdy metal clamp base, it can be installed on the table edge (maximum table thickness: 4 cm) and change four direction for you need. This kit don't include the cup@Durable and Stable: The C-clamp base match with a reliable and quiet motor and UL certified wire. It can make your machine not easy to fall during working time@Space-saving and Easy Storage: The cup spinner doesn't take up much space on the desktop for using the metal clamp base. The base and wooden body of the tumbler turner can be separated, it is easy to store and effortlessly portable@Easy to Assemble: Installing the tumbler turner’s process is simple, only requires four steps and 3 pieces of fasten screws. It is only take 4 minutes to install the tumbler turner before enjoyed your unique design cup@Multipurpose Foams: The foams have two functions, it can hold the cup on the machine during working time and work as cup drying stands. The foam’s pores are small, so it fits closely to the machine and will not fall off during use. When you are completed you work, you need to dismantling slowly

Choose your country:

United States
Sntieecr Clip-on Table Cup Turners for Crafts , Epoxy Tumbler Kit with Resin Tools for DIY Glitter Epoxy Tumblers

Synchronous motor:
AC 100-127V
50/60 Hz 4W
5-6R/MIN
CCW/CW

Electric wire:
American standard plug
Approved with UL certification
3A/125VAC
Wire length: 1 m

How to assemble the C-clamp table tumbler turner:
Step 1: Hold the lower part of the C-clamp on the table edge and tighten the knob
Step 2: Fix the one of the upper parts with screws in the direction you need
Step 3: Install the other upper part according to the thickness of the board
Step 4: Tighten with hex wrench

Package Including: 
1 x Motor Part
1 x C-Clamp Support
2 x Black Foams
1 x Hex Wrench
1 x Screwdriver
3 x Screw
1 x Silicone Pads
1 x Silicone Measuring Cup (100ml)
10 x Plastic Cups
10 x Wood Mixing Sticks
4 x Plastic Gloves (2 Pairs)
1 x Soft Brush
1 x Silicone Brush
1 x Tape
1 x Installation instruction

Warm Notice:
Please do not use this product for a long time. It is recommended to turn off motor half an hour after five hours, wait for the machine to cool, and then turn it back on.